ÿþEngineer Humpty =============== LOADING THE PROGRAM 1. Connect the ear socket of the Spectrum to the ear socket on your cassette recorder. 2. Make sure the tape is wound to the beginning. 3. Set the volume control to a suitable level. 4. Set maximum trebble, minimum bass on the tone controls. 5. Type LOAD "" 6. Press ENTER. 7. Start the cassette recorder. 8. The program will RUN itself once loaded and will provide instructions. If the program does not load correctly try a different volume level. (c)Copyright 1984 Artic Computing Ltd. All rights of the producer, and of the owner, of the work being produced, are reserved. Unauthorised Copying, hiring, lending, public performance and broadcasting of this cassette is prohibited. The publisher assumes no responsibility for errors, nor liability for damage arising from its use. WARNING: These programs are sold according to Artic Computing Ltd's terms of trade and conditions of sale. Copies of which are available at request. ENGINEER HUMPTY --------------- ZX Spectrum 48K Humpty is stuck at the top of the factory and has to get his tools into his tool box which is somewhere below him. The only way he can do this is with your help. Can you guide the spanners so they fall onto the correct series of conveyor belts and finally into his tool box. You must be very careful if the spanner falls onto the wrong canveyor belt you're likely to be crushed or melted down. So you think it sounds simple, eh! Well try it because it isn't. At the top of the factory Humpty cannot see the tool box but as you move the spanner down the conveyor belts, things do become clearer. OPTIONS: Sinclair or Kempston Joysticks or keyboard controls keys are as follows: Z - moves the spanner left X - moves the spanner right BREAK/SPACE - drop spanner To Pause PRESS - ENTER If you can help Humpty Dumpty to get his tools you will find that he has 16 different factories each one more difficult then the last! Good Luck!! (c)Copyright 1984 Artic Computing Ltd.